How to Remove Flow Restrictor from Bathroom Faucet

Bathroom Scape may collect a share of sales or other compensation from the links on this page. This comes at no additional cost to you, and all the prices and availability are accurate at the time of publishing.

Are you tired of the feeling that your hands are being rinsed under a minuscule stream of water? Do you long to experience the might of your bathroom faucet and feel as if you’re relaxing under a natural cascade? 

It’s time to rid yourself of that frustrating water flow restrictor and let it pour as it should! With some simple tools and a dash of expert knowledge, you can vanquish that restrictor like a pro and indulge in an unmatched sink experience. Come on, let’s get rid of that trickle and unleash the flow!

Why Remove the Flow Restrictor?

Faucet Aerator, Faucet Flow Restrictor Replacement

The flow restrictor is your faucet’s own water savior that limits its water usage per minute. While taking it out may seem like a cool DIY project that upgrades the water pressure and simplifies cleaning, it can actually break water conservation laws in some locations and increase your water bill.

So before you go ahead and pull it out, make sure to do your homework on the local regulations and environmental impact.

How to Remove Flow Restrictor from Bathroom Faucet

Precautions

To safely remove the flow restrictor from your bathroom faucet without causing any damage or making a mess, follow these steps:

  • To avoid the spray, shut off the water supply of the faucet.
  • Keep a bucket or towel underneath the faucet to catch any leaks.
  • Use proper tools (like pliers or an adjustable wrench) to remove the faucet to prevent damage.
  • While taking off the flow restrictor, handle it patiently and cautiously to prevent leaks or damage.

Tools Needed

To increase the flow of water from your bathroom faucet, follow these simple steps:

WORKPRO 2-piece Adjustable Wrench Set, 6-Inch & 10-Inch, Extra-Wide Jaw Black Oxide Wrench, Metric & SAE Scales, Cr-V Steel, for Home, Garage, Workshop, And DIY

Wrenches

Klein Tools 32500 11-in-1 Screwdriver / Nut Driver Set, 8 Bits (Phillips, Slotted, Torx, Square), 3 Nut Driver Sizes, Cushion Grip Handle

Screwdriver

Edward Tools Slip Joint Pliers 6” - Heavy Duty Carbon Steel with Rubber Grip Handle - Fine Grip Teeth in front and Coarse teeth in back - Rust resistant finish (1)

Pliers

3-IN-ONE Multi-Purpose Oil, 3 OZ

Lubricant

Amazon Basics Microfiber Cleaning Cloths, Non-Abrasive, Reusable and Washable - Pack of 24, 12 x16-Inch, Blue, White and Yellow

Cloth

Step-by-Step Guide

When it comes to bathroom faucets, the water flow can be restricted in one of two ways – via a single flow restrictor or an aerator flow restrictor. This time, let’s walk you through how to remove a single flow restrictor since it is the most frequently found water limiter in bathrooms.

Step 1: Turn Off the Water Supply

Alright, before you start descaling your bathroom sink, you gotta turn off the water supply. Look under the sink for the valve and turn it clockwise till it stops. This shuts off the water supply to the faucet.

Step 2: Remove the Faucet Aerator

Take off the faucet aerator by turning it counterclockwise with pliers. Remember to be careful while removing it, or you might end up damaging the aerator or the faucet!

Step 3: Locate the Flow Restrictor

So, you’ve taken down the aerator. Now it’s the flow restrictor’s turn to play. It’s a tiny piece of plastic or metal that resides within your faucet, looking all authoritative and stuff, controlling the water flow and conserving the precious drops.

Step 4: Remove the Flow Restrictor

You need to flex your muscles a little and grab a pair of pliers. Now, grip the restrictor firmly and twist it gently but counterclockwise. If the little guy won’t budge, no worries. Just find a small flathead screwdriver to help nudge it lose. But hey, be careful not to scratch the faucet while you’re at it!

Step 5: Reassemble the Faucet

So now that you’ve successfully extracted the flow restrictor from your bathroom faucet, it’s time to put it back together again! No need to panic. Just take your trusty pliers and secure the aerator into place.

Once that’s done, it’s time to turn the water supply back on and test out your newly modified faucet. Quick tip, though, be mindful that removing the restrictor might lead to higher water bills and have an environmental impact.

Frequently Asked Questions

Is it legal to remove the flow restrictor from a bathroom faucet?

A: Yes, it’s legal to do so! Just keep in mind that taking off that pesky little guy might make your warranty moot and put a dent in your wallet by maxing out that water bill.

How do you know if your faucet has a flow restrictor?

If the faucet was produced within the last decade or so, there’s a good chance it has a flow restrictor. You can check for a small plastic disc or screen inside the faucet aerator to confirm whether it has one or not.

Can you remove the flow restrictor without tools?

You can eliminate the flow restrictor without any tools, but it’s a bit of a challenge. Generally, the restrictor is secured in place by either a screw or a clip that may be removed using pliers or a screwdriver. If you’re toolless, you can even try being creative by using tweezers or a toothpick to pry out the restrictor gently.

Will remove the flow restrictor damage the faucet?

Removing the flow restrictor should not damage the faucet, provided you use the correct tools and are careful to avoid scraping or scratching the faucet surface. However, if you are not careful or use too much force, it is possible to cause damage.

Conclusion

Congrats! You’re now an expert at removing flow restrictors from bathroom faucets. It’s DIY time, but don’t forget to stick to the steps in the manual & proper tools for safe and uneventful faucet repair. If anything goes sideways, remember- call a pro. Enjoy your new unrestricted water flow!