How To Clean a Showerhead With Baking Soda

Bathroom Scape may collect a share of sales or other compensation from the links on this page. This comes at no additional cost to you, and all the prices and availability are accurate at the time of publishing.

Is your shower head feeling a little lackluster lately? Does it seem like the water pressure just isn’t what it used to be?  If this is the case, then it’s time to give your shower head a good deep cleaning. Here’s how to clean a showerhead with baking soda.

One of the easiest and most effective ways to clean a showerhead is with baking soda. Baking soda can help remove any buildup of dirt, grime, and limescale from your shower head. This guide will demonstrate how to use baking soda to clean your shower head and restore it to its original state. You’ll no longer have to deal with low water pressure, and you’ll be able to enjoy a rejuvenating shower experience.

Why Clean Your Shower Head?

SparkPod Shower Head - High Pressure Rain

Cleaning your shower head may seem unimportant, but it can impact your shower experience. Mineral deposits, dirt, and bacteria can accumulate, causing clogs, reduced water flow, and unpleasant odors.

Regular cleaning removes buildup, improving water flow and quality while minimizing bacteria and potential health issues. It also extends the lifespan of your shower head. Clean your shower head regularly for a pleasant shower experience, hygiene, and a longer-lasting shower head.

How To Clean a Showerhead With Baking Soda

What You Need

Collect all the required materials and tools before beginning the cleaning process for a smoother experience.

Materials

To clean a shower head with baking soda, you will need the following materials:

Arm & Hammer Pure Baking Soda (15 lbs.)

Baking soda

Lucy's Family Owned - Natural Distilled White Vinegar, 1 Gallon (128 oz) - 5% Acidity (White Vinegar, Gallon)

White vinegar

Nestle - Pure Life, Purified Water, 676 Fl Ounce (16.9oz / 40pk)

Water

Tools

You will also need the following tools:

12" X 16" Plastic Produce Bag on a Roll, Bread and Grocery Clear Bag, 350 Bags/Roll

Plastic bag

300 Pcs Twist Ties, Plastic 5" Twist Ties, Twist Ties for Bags, Wire Ties Reusable Twist Bread Ties for Household and Office Use

Rubber band or twist tie

Colgate 360 Optic White Advanced Toothbrush, Medium Toothbrush for Adults,2 Count (Pack of 1)

Toothbrush

AIDEA Microfiber Cleaning Cloths-8PK, All-Purpose Softer Highly Absorbent, Lint Free - Streak Free Wash Cloth for House, Kitchen, Car, Window, Gifts(12in.x 12in.)

Soft cloth

Steps to Follow

To easily and effectively remove mineral buildup and dirt from a shower head, follow these steps for cleaning it with baking soda:

1. Remove the Showerhead

To clean the shower head, you must first remove it from the shower arm and then turn off the water supply to the shower. Use a wrench to loosen the nut that connects the shower head to the shower arm, and then unscrew and remove the shower head.

2. Mix the Baking Soda Solution

Mix 1/2 cup of baking soda and 1 cup of white vinegar in a bowl to create a paste. Stir until the baking soda dissolves completely.

3. Soak the Shower Head

To dissolve any mineral buildup, please soak the shower head in a bowl of baking soda solution for at least 30 minutes by fully submerging it.

4. Scrub the Shower Head

After soaking, remove the shower head from the solution and use an old toothbrush to scrub away any remaining dirt or mineral buildup. Be sure to scrub all the nozzles and crevices thoroughly.

Step 5: Rinse and Reattach the Shower Head

Rinse the shower head thoroughly with warm water to remove any remaining baking soda solution. Once rinsed, reattach the shower head to the shower arm and tighten the nut with a wrench.

To ensure the shower head is working correctly, please turn on the water supply and test it. You can effectively remove mineral buildup and dirt from the shower head by cleaning it with baking soda. Just follow these steps, and you’ll have a clean and properly functioning showerhead in no time.

Additional Tips

If you want to clean a showerhead using baking soda, there are some helpful tips to keep in mind. First, dissolve the baking soda in hot water to make it easier to apply. If the showerhead is especially dirty or clogged, you can soak it in the solution for several hours.

To avoid any future buildup, remember to flush the shower head with hot water after cleaning. It is suggested to clean the shower head regularly to prevent buildup and ensure it’s functioning well. Following these tips, you can easily and quickly clean your shower head using baking soda which improves the appearance and functionality of your bathroom.

FAQs

How often should you clean your shower head with baking soda?

To keep your shower head clean, use baking soda to clean it every three months. Nevertheless, if you reside in an area with hard water, you might need to clean it more frequently. You can tell that your shower head requires cleaning if you notice reduced water pressure, an uneven spray, or visible buildup.

Can you use vinegar instead of baking soda to clean a showerhead?

Yes, one way to clean a showerhead naturally is by using vinegar. You can make a mixture of equal parts water and white vinegar and pour it into a plastic bag. After placing the bag over the shower head, secure it with a rubber band. Wait for several hours or overnight, then remove the bag and rinse the shower head with water.

Can you use baking powder instead of baking soda to clean a showerhead?

No, baking powder is not a suitable substitute for baking soda when it comes to cleaning a shower head. Baking powder contains additional ingredients, such as cream of tartar and cornstarch, that will not provide the same cleaning power as baking soda.

How do you prevent buildup on a shower head?

To prevent buildup on a shower head, consider installing a water softener or using a shower head filter. Additionally, you can wipe down the shower head after each use to remove any excess water and prevent mineral buildup.

Can you clean a showerhead without removing it?

Yes, you don’t have to take the shower head off to clean it. You can use a plastic bag and a rubber band to clean it while it’s still attached. Make a paste of baking soda and water, apply it to the shower head, and cover it with a plastic bag. Let it sit for a few hours or overnight, then remove the bag and rinse the shower head with water.

Conclusion

Having a clean, functioning showerhead is essential for maintaining a healthy and comfortable environment. To keep your shower head free of mineral buildup, use baking soda as a natural cleaning agent and follow these steps. With regular maintenance and a few tips, you can ensure that your shower head remains in good condition for many years.

If you liked this article about how to clean a showerhead with baking soda, consider checking out these articles —