The Ultimate Guide on How to Measure for a Sink Grid and the Different Types of Kitchen Sink Grids

Bathroom Scape may collect a share of sales or other compensation from the links on this page. This comes at no additional cost to you, and all the prices and availability are accurate at the time of publishing.

You have a new sink, and you would like to keep it nice and clean. Kitchen sinks are probably the most used item in the kitchen next to the knife. Over time you will inevitably get scratches and dents on the surface of the sink while washing pots and dropping items in the sink that can make them look old and ugly. Here is a guide on how to measure for a sink grid.

A sink grid is not only the perfect solution for preventing those pesky scratches but it has other benefits, too however, you have to make sure you get the right one that fits your sink.

In this article, we will teach you how to measure for a kitchen sink grid and show you the different types that are available. We’ll also discuss why it is important to have a kitchen sink grid in your kitchen, pinpointing the key benefits.

What Is A Kitchen Sink Grid?

YAQUN Kitchen Sink Grid and Sink Protector 25" X 13 3/16", Sink Protectors for Kitchen Sink with Center Drain Hole,Stainless Steel Sink

It is essentially a rack that is typically made from stainless steel with a rubber or silicone coating that sits in your sink. the main purpose is to protect your sink from scratches and dents.

These kitchen sink grids are known by a variety of different names, such as sink guards, sink racks, sink grates and sink racks.

They do come in various shapes, sizes, and colors, matching different kitchen styles, enhancing the look of your sink while keeping your sink scratch free at the same time.

How To Measure For A Kitchen Sink Grid

MONSINTA Kitchen Sink Grid and Sink Protectors, Stainless Steel Sink Grids for Bottom of Kitchen Sink, 26" x 14" with Rear Drain for Single Sink Bowl

Kitchen sink grids similar to sinks come in different shapes and sizes. In order to get the best out of your sink grid you will have to ensure you get it in the size and shape of your sink. Let’s look at how to measure your kitchen sink for a grid.

What You Need

  • Tape measure
  • Pencil/Pen
  • Paper

Measure The Length

Take your tape measure and place it on the base of the sink on the far left side and stretch it until reaches the right side wall of the sink. This will give you the inner length.

Measure The Width

The width can be measured by once again placing the measuring tape on the floor of the sink against the sink wall closest to you and stretching it out further away until it reaches the wall. Make sure to always measure twice and jot it down.

Drain Location

Note where the drain is located and measure out the distance to the left and the right from the center of the drain. This is important as the opening in the sink grid should match up with the drain opening, whether it is on the left, right, or center of the sink.

Curvy Sink

It is important to note if your sink has a curve at the bottom then you will need to consider that when measuring because the sink grid sits about an inch from the floor.

Benefits Of Kitchen Sink Grids

Sink Protectors for Kitchen Sink - 13 5/8 in x 11 5/8 Stainless Steel Sink Grid 2pcs Set - Kitchen Sink Protector Center Drain Hole

Kitchen sink grids are a great product for the kitchen. They require no installation, are cheap and serve an important purpose. Below are some of the benefits of having a kitchen sink grid.

Protects The Surface of The Sink

Kitchen sink surfaces tend to take quite a thrashing over time. With the dishes, pots, pans, and cutlery, not to mention the food and drinks that get poured into the sink daily, it is no surprise that they get scratched and dented.

The grid will prevent the sink from all these elements and keep your sink looking fresh and new for years to come.

Less Noise And Breakages

If you drop a glass, plate, or cup in a ceramic sink, it will, in most cases break and make a loud sound. A grid will not only help save your precious glass but will also reduce the sound a glass or pot makes if it slips out of your hand and falls into a bare sink.

Unique Look

A grid that fits the sink correctly will give a custom feel to the sink and the kitchen. There are a number of different styles available in different colors to match the sink that you have.

Dish Rack

Larger families with kids typically generate more than average dirty dishes causing the dish rack to fill up fast. Instead of balancing those last couple of glasses on edge, you can place them safely on the sink grid to drip dry.

Dishwasher Safe

The kitchen sink grid will get dirty over time, and if you have a dishwasher, you can place it inside and wash it without having to spend time brushing and drying it.

Cheap To Replace

If you have had your sink grid for a while and it is damaged or is just looking worn with food stains, then replacing it is a good idea as they are relatively inexpensive.

Disadvantages Of Kitchen Sink Grids

There are a few disadvantages to having a kitchen sink grid, but we believe that if you are regularly cleaning and drying your sink after every use, then the benefits out way the disadvantages significantly.

Food Waste Residue

When you throw food, especially oily food, down the drain, it tends to get stuck in the grooves of the sink grid and the rubber feet. Make sure to clean the sink grid every week or twice a week in a dishwasher or with a small brush and then disinfect it.

Bacteria

If the sink grid is not cleaned properly and dried, it will start to harbor bacteria which is then transferred to your dishes and glasses, which is not good for you or your family’s health.

Water Marks

In areas where there is a high mineral content in the water, you will find watermarks starting to appear under the sink grid. To avoid this, every time you finish doing the dishes, remove the sink grid and wipe the sink down thoroughly.

What To Consider When Choosing A Sink Grid

Sink Protectors for Kitchen Sink - 13 5/8 in x 11 5/8 Stainless Steel Sink Grid 2pcs Set - Kitchen Sink Protector

The sink grid has to be the correct size, and getting the correct measurements is very important. However, there are a few other things that you will need to consider when buying that kitchen sink grid.

Quality

Typically, kitchen sink grids are made of stainless steel pieces that are welded together to form a grid with 1″ legs. However, some manufacturers offer grids made from copper, silicone, and resin.

If you are going to choose stainless steel, then make sure the steel is of good quality, making it resistant to rust and corrosion.

Welding Done Well

Stainless steel grids are welded to create the structure; however if the welding has been done poorly, then the joints will be rough and lumpy, allowing food to collect, making it difficult to clean and more susceptible to corrosion.

Rubber Or Silicone Feet

When choosing your sink grid, make sure the legs are covered with good-quality rubber or silicone. This will ensure that your sink grid won’t leave any marks or scratches on the bottom of your sink.

Grid Spacing

The space in between the bars on the grid will determine whether you can stack plates in it. If you require extra drying space for your plates and dishes and want to use your sink grid as a spare drying rack, then this will be something to look out for.

Grid Coat

Stainless steel grids are now available with a powder, rubber, or silicone coating. These types of coatings give extra protection against corrosion while also making them non-slippery. It is, however, important to note that the coating will fray over time, leaving the sink grid looking rather unsightly.

How To Clean A Kitchen Sink Grid

It is very important to clean the sink grid at least once a week to remove any food or grime build-up. This will reduce bacteria growth and multiplication. It is surprisingly easy to clean the grid and you can clean the sink at the same time.

Dishwasher

This is the easiest method to clean the sink grid. Simply put it in the dishwasher when washing the dishes.

A Mixture of Baking Soda and Vinegar

While your grid is sitting in the sink, sprinkle some baking soda on it and spray white distilled vinegar on it. With a brush start to scrub the sink grid, getting into all the corners and areas where food and grim can settle. Rinse with water and if needed repeat the process until the grid is clean.

Soapy Water

Soapy water is perfect to clean the sink grid if you don’t have vinegar or baking soda in your home. Use warm water and dishwashing liquid to make a diluted soapy mix and using a brush scrub the grid until clean. Rinse and repeat if the grid is still dirty.

Steam Cleaner

These little devices are great at cleaning and are very easy to use. If you do not own a steam cleaner then you should hire one from a hardware store. The steam jet will get into those hard-to-reach areas while killing any bacteria with the hot steam.

Alternatives To A Kitchen Sink Grid

Some people simply don’t like sink grids because of the legs that leave marks or maybe because they find it difficult to clean the grid. There are a couple of options if you want to avoid the kitchen sink grid.

Silicone Mat

The silicone mat is a great substitute for the sink grid. Typically, these mats have suction cups on the underside that stick to the sink. They will protect your sink from scratches and diminish loud sounds from falling pots or pans.

Additionally, they will never rust or corrode and are easy to clean. When they start to look old, they are inexpensive to replace.

Rubbermaid Sink Protector Mat, Small, Black Waves

Rubber Sink Protector

Rubber sink protectors are similar to kitchen sink grids in design but they are made from rubber and some are even heatproof meaning you can place hot pans or pots on them directly in the sink.

Breathe Essential (20.5" x 15.7" Roll Up Dish Drying Rack - Over The Sink Caddy for Kitchen Counter, Folding Dish

Roll Up Stainless Steel Sink Protector

This is a great alternative to the kitchen sink grid that sits in the sink all the time. Once you are done with the dishes you can roll the protector up and place it on one side.

FAQS Frequently Asked Questions

What if you can’t find a sink grid to match your measurements?

There are many different manufacturers so there is a kitchen sink grid no matter the size of your sink. You can search for a sink grid using the make and model of your sink if you are having difficulty finding a sink grid with your measurements.

Can sink grids go in the dishwasher?

Most full-size dishwashers will be able to fit a sink grid. Remember to remove the rubber feet as they can come off or warp during the wash due to the hot water.

Alternatively, you can use soapy water, a brush, and a little bit of scrubbing if your grid doesn’t fit your dishwasher or you don’t have one.

Can you use bleach on a stainless steel sink grid?

Bleach and household cleaners that contain chlorine should not be used to clean or disinfect the stainless steel sink grid. The chlorine will burn and stain the steel permanently.

How to remove scratches from a stainless steel sink?

Small scratches can be easily removed using Bar Keepers friend or a small dab of toothpaste. Use a microfiber cloth and rub it into the scratches, following the grain until the scratches vanish.

Scratch kits are available for the more stubborn ingrained scratches, and these kits contain different abrasive pads and a cleaning compound.

Conclusion

Measuring the sink is not difficult; however, always measure twice to ensure your measurements are correct. A sink grid will keep your sink looking new for years, so make sure you get the correct size with the drain opening in the correct position.

To extend the life of your sink grid, clean it regularly and make sure to clean the sink under the grid as well. 

Ensure the quality is good, and it will stand the test of time. If you are buying online, then check the reviews and what other people are saying about it.

If you liked this article about how to measure for a sink grid, consider checking out these other articles below —