How to Remove Shower Handle

Bathroom Scape may collect a share of sales or other compensation from the links on this page. This comes at no additional cost to you, and all the prices and availability are accurate at the time of publishing.

Are you getting worried about removing your shower handle? No problem! It’s easier than you think. With just a few steps and the right tools, you can easily upgrade your shower or replace a faulty handle. In this guide, we’ll show you how to safely and effectively remove your shower handle in just a few simple steps.

Why Remove a Shower Handle?

Moen Gibson Chrome Pressure-Balancing Modern Valve Trim

Whether you’re fixing a leak, replacing a broken handle, or updating the cartridge, removing the handle is a quick and easy DIY project. With a few basic tools and some perseverance, you can significantly improve the look and function of your shower without spending a lot of money. Just follow these simple steps, and homeowners can complete the task with ease.

How to Remove Shower Handle

Tools You Need

Here are the necessary items for the task of uninstalling your shower handle successfully:

  • Screwdriver (both Phillips and flathead)
  • Allen wrench (if needed for Allen screw)
  • Pliers (to get a better grip and apply more leverage)
  • Adjustable wrench (if needed to remove shower arm from wall)
  • Silicone lubricant (to loosen a stuck handle)
  • Bucket or bowl (to catch the water that may come out)

DEWALT Screwdriver Bit Set with Tough Case, 45-Piece (DW2166),Grey/Silver Screwdriving Set With Tough Case

Screwdriver (both Phillips and flathead)

30-Piece Premium Hex Key Allen Wrench Set, SAE and Metric Assortment, L Shape, Chrome Vanadium Steel, Precise and Chamfered Tips | SAE 0.028 - 3/8 inch | Metric 0.7 - 10 mm | In Storage Case

Allen wrench (if needed for Allen screw)

WORKPRO 7-piece Pliers Set (8-inch Groove Joint Pliers, 6-inch Long Nose, 6-inch Slip Joint, 4-1/2 Inch Long Nose, 6-inch Diagonal, 7-inch Linesman, 8-inch Slip Joint) for DIY & Home Use

Pliers (to get a better grip and apply more leverage)

CRAFTSMAN Adjustable Wrench Set, 3-Piece (CMMT12001)

Adjustable wrench (if needed to remove shower arm from wall)

WD-40 Specialist Silicone Lubricant with SMART STRAW SPRAYS 2 WAYS, 11 OZ

Silicone lubricant (to loosen a stuck handle)

Rubbermaid Commercial Products 2.5 Gallon Brute Heavy-Duty, Corrosive-Resistant, Round Bucket, Red FG296300RED

Bucket or bowl (to catch the water that may come out)


To safely and efficiently remove a shower handle, follow the steps provided below with the appropriate tools and instructions. Although it may appear intimidating, it can be a simple procedure.

Step 1: Turn Off the Water Supply

To fix a leaky shower head, start by turning off the water supply. Find and turn off the water valves under the sink or behind the shower wall. If you’re not sure how to locate these valves, get in touch with a plumbing professional for assistance.

Step 2: Remove the Cap or Cover Plate

Start your process of removing the shower handle by saying farewell to that little cap or cover plate. To get rid of it, a flathead screwdriver or Allen key is the go-to wrench. Remember to show it some love and avoid any damage!

Step 3: Remove the Screw or Allen Key

To proceed, remove the cap or cover plate. Then, utilize the right tool to take out the screw or Allen key and release the handle. Be cautious not to damage the screw or the handle during this process.

Step 4: Pull Off the Handle

After removing the screw or Allen key, pull the handle with some force. If it’s still stuck, use a handle puller tool to nudge it off.

Step 5: Remove Escutcheon Plate

To remove the handle, first, try pulling it with force. If it doesn’t come off, try nudging it gently or using a handle puller tool. Once the handle is off, carefully remove the escutcheon plate. You can use a flathead screwdriver to pry it off, but be cautious to avoid damaging the shower wall or plumbing.

Step 6: Remove the Cartridge or Valve Stem

You need to remove the cartridge or valve stem, and you can do it using a cartridge puller tool. Ensure to carefully follow the dos and don’ts provided by the manufacturer to avoid causing damage to your plumbing or shower wall.

You successfully removed the shower handle and should feel proud of your accomplishment. However, if you encounter any issues along the way, don’t hesitate to contact a plumber for assistance if things don’t go as planned.

Tips and Tricks

Follow these key points to keep in mind while removing your shower handle:

  • Research your handle and review the necessary steps to remove it.
  • Use the appropriate tools not to compromise the handle or shower unit.
  • Take it easy and wiggle the handle if necessary to loosen it up.
  • Thoroughly clean the area before fitting a new handle.
  • Snap pictures to easily remember how to reassemble your handle.
  • Don’t put too much force if the handle won’t budge; give the area a little lubrication instead.
  • Seek help if needed to avoid further issues.

Following these tips will make the process of removing a shower handle simple and effective.

Frequently Asked Questions

How do you remove a shower handle?

If you want to remove your shower handle, start by turning off the water supply to your shower. After that, find the screw holding the handle and use a screwdriver or wrench to remove it. Then, gently pull the handle off the valve. If the handle is difficult to remove, you can try using a handle puller.

Can you remove a shower handle without a tool?

If you need to remove a shower handle but don’t have tools, it’s still possible. First, try pulling the handle off by hand. If that doesn’t work, you can use pliers or a wrench to loosen it. However, it can be a bit challenging.

How do you know what type of shower handle you have?

To determine the type of shower handle you have, examine its shape and design. It could be a knob handle, a lever handle, or a cross handle. If you’re unsure, visit the manufacturer’s website or check the user manual for more information. Good luck!

What should you do if the shower handle won’t come off?

To help loosen the handle, you can either use a handle puller or apply heat to it using a hairdryer or heat gun. Hopefully, this will solve the issue, and you’ll be able to move the handle more easily.

Can you replace a shower handle yourself?

You are capable of replacing a shower handle on your own with some simple tools. Just remember to turn off the water, remove the old handle, replace it with the new one, and you’re done! If you feel unsure, you can always contact a plumber for help.


Removing a shower handle is a straightforward process that doesn’t require too much effort or time. Just grab the right tools, follow the instructions, and voila! If things don’t go as planned, do not hesitate to seek help from professionals. You can handle this!

If you liked this article about how to remove shower handle, consider checking out these other articles below —