How to Remove the Showerhead

Bathroom Scape may collect a share of sales or other compensation from the links on this page. This comes at no additional cost to you, and all the prices and availability are accurate at the time of publishing.

Are you tired of showering under a dribbling stream of water because of a clogged showerhead? Does your current showerhead look like it’s been through a war and lost? Learn how to remove shower head below.

We know removing a showerhead may seem like a daunting task, but with the right tools and a little know-how, it can be done quickly and easily. Whether you are looking to replace your old shower head or simply need to clean it, removing it is the first step.

Well, in this guide, we’ll show you how to remove that stubborn showerhead and replace it with a sparkling new one. No need to call in a plumber or settle for subpar showering. Just follow our simple steps and get ready to enjoy a revitalized shower experience.

How to Remove the Showerhead

Tools and Materials

All you need are a few simple tools and materials:

  • A pair of pliers
  • An adjustable wrench or basin wrench
  • Teflon tape
  • A rag or cloth

CRAFTSMAN CMHT81645 8-in. Long Nose Pliers, Chrome

A pair of pliers

CRAFTSMAN Adjustable Wrench, 6-Inch (CMMT81621)

An adjustable wrench or basin wrench

DOPKUSS Plumbers PTFE Pipe Sealant Tape Flex Seal Tape Waterproof (1/2 by 520 Inches 1 Roll)

Teflon tape

HOMEXCEL Microfiber Cleaning Cloth,12 Pack Cleaning Rag,Cleaning Towels with 4 Color Assorted,11.5"X11.5"(Green/Blue/Yellow/Pink)

A rag or cloth

To have a smooth and hassle-free process, it’s important to have these tools and materials readily available.


Getting ready to remove a showerhead? There are a few things to keep in mind! Turn off the water supply, either via the valve by the shower or the main house valve, to avoid leaks. Next, guard the drain from small parts with cloth or tape. 

Before taking the showerhead off, clean the shower arm using a mix of water and vinegar to remove any debris. This helps loosen it up and makes it a breeze to remove.

1. Removing the Shower Head

You know how to ditch your showerhead with two legit options: go old-school with your bare hands or channel your inner handyman with a wrench. This is a crucial skill to up your shower game with a swanky new showerhead or replace a faulty one.

2. Loosen the Shower Head with a Wrench

For a quick fix, try loosening your shower head using a wrench. Get an adjustable wrench or pliers and turn off the water supply to the shower. 

Next, wrap a cloth around the base of the shower head to keep it scratch-free. Use the wrench or pliers to get a grip on the shower head and twist counterclockwise to loosen it. If it’s a real pain, try adding some penetrating oil to help things along.

3. Remove the Shower Head by Hand

You can also unscrew the shower head manually without the need for tools. Begin by shutting off the water supply to the shower and wrapping a soft cloth around the base of the shower head to keep it scratch-free. 

Next, use your actual hands to grip the shower head firmly and start turning it in a counterclockwise direction to loosen it. If it still doesn’t budge, you could try using some penetrating oil to give it some extra motivation.

After taking off the shower head, make sure to clean the threads thoroughly before installing a replacement, if necessary. To avoid any leaks, don’t forget to use thread seal tape.

4. Replacing the Shower Head

When it comes to replacing a shower head, it’s important to follow the proper steps to ensure a successful installation. Here are the steps to follow:

5. Wrap Teflon Tape Around the Shower Arm

Before installing the shower head, ensure to wrap Teflon tape around the shower arm to prevent those pesky leaks. This water-resistant tape is a must-have in every plumber’s toolbox!

Start at the base of the threads, and wrap it clockwise around the shower arm, making sure it’s tight and even. Continue wrapping the tape until you reach the end of the threads, wrapping at least three times.

6. Screw the New Shower Head onto the Arm

Great job! You made it through the pre-installation process. Now it’s time for the grand finale- installing the new shower head. Put your muscles to work and screw the new shower head onto the shower arm.

Use a wrench or pliers for a good grip. But remember, don’t tighten like a monster! You don’t want to harm any of the parts or yourself. Check if everything is leak-free by turning on the shower. If there are leaks, just use the wrench or pliers to fine-tune your masterpiece.

That’s it, and your new shower head is up and ready for action! Get ready to start the shower dance! You can look forward to a daily shower that will leave you feeling refreshed and energized.


How do you remove a showerhead?

To detach a shower head, gently unscrew it from the shower arm – the pipe that links it to the wall. Use a wrench or pliers to turn the shower head counterclockwise without harming the shower arm or threads on the shower head.

What if the shower head is stuck?

To loosen a stuck shower head, try spraying WD-40 or another penetrating oil onto the threads and letting it sit for a few minutes. Then, use pliers or a wrench to turn the shower head counterclockwise. If it’s still stuck, try using a pipe wrench or an adjustable wrench to get more leverage.

Can you remove a showerhead without tools?

In some cases, you may be able to remove a shower head without tools. If the shower head is not too tight, you can try turning it counterclockwise by hand. If that doesn’t work, you can wrap a towel around the shower head and use pliers to grip it and turn it counterclockwise.

How do you clean a showerhead?

To clean a shower head, you can soak it in a mixture of equal parts vinegar and water for a few hours. Then, scrub the shower head with a toothbrush to remove any buildup. Rinse the shower head with water and dry it with a soft cloth.

How do you replace a showerhead?

To replace a shower head, you must unscrew the old shower head from the shower arm and screw on the new shower head. Make sure the threads on the shower arm and the new shower head are clean and free of debris. Use a wrench or pliers to tighten the new shower head onto the shower arm.


That’s a wrap! With the easy and quick steps outlined in this article, you’ll be able to replace your old showerhead with a new one in no time. Just ensure you have the necessary tools and supplies on hand and you’re all set!

If you liked this article about how to remove shower head, consider checking out these other articles below —